Ningbo Yokelink Machinery Co.,Limited

Wind System Fasteners Catalogue

Yokeink specialize in providing a wide range of fasteners for the wind energy industry, ensuring high quality and compliance with international standards.

Изтегли

Yokelink Waterwork T-head Bolt And Nut Catalogue

Yokelink Mechanical Joint T Head Bolt and nut for Waterwork are accordance with ANSI/AWWA C111/A21.11. Material including High strength low Alloy Steel; and 304, 316 Stainless Steel. Diameters have 5/8”, 3/4”, 1” and 1-1/4”. The Length from 3” to 9”, Special thread lengths and non-standard lengths available on request. T Head bolts and hexagonal nuts in use for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings. T-Bolts are made according to requirements specified by the American Water Works Association or based on customer own specifications. Products are offered in range coatings, including colour coding of nuts /or/ bolt and nut assemblies.

Изтегли

YOKELINK Anchoring & Grounding Catalogue

Yokelink is a Professional Anchoring Grounding manufacturer is located in China, including Thimbleye , Twineye, Tripleye and Oval Eye Anchor Rods, Galvanized Ground Rod,Copper Bonded Earth Rod,Rock Anchor Extension Rod, No Wrench Anchor, Bust Expanding Anchor, Cross Plate Anchor etc. We offers a broad range of anchoring and grounding products designed to provide stability, safety, and durability across industries. Below is an overview of our Anchoring & Grounding categories. 1. Thimbleye, Twineye, Tripleye and Oval Eye Anchor rod Thimble eye, Twin Eye , Triple eye and Oval Eye Anchor Rods are used for guying with expanding and cross plate anchros. Hot dip galvanized to meet ASTM A153 specification. 2. No Wrench Anchor No Wrench Anchor are used for guying wires at utility poles. Eye dimensions are the same as Anchor Rods. Hot dip galvanized to meet ASTM A153 speficaition 3. Expanding ( Bust ) Anchor Expanding Anchor are made for installation in hole augered by power drillers. A retainer on the bottom holds the nut from the Forged eye rod. Black Painting or Hot dip galvanized finish. 4. ground rods Ground Rods are used as a grounding electrode for building and poles. These rods have a cone point for easy driving and a plain end for attaching a ground rod Clamp . Hot Dip Galvanized or Copper plating finish. 5. Extension Anchor Rod Extension Anchor Rod used in conjunction with internally tapped Anchors and couplings or eye Nuts . 6. Expanding Rock Anchor Yokelink Expanding Rock Anchor Rod provide strength and stability to rock andconcrete structures. They are constructed of a drop forged tripleye rod and two opposing wedgehalves.The anchor is placed in a hole pre-drilled in the rock. Hot dip galvanized per ASTM A153.

Изтегли

FORGED THIMBLE EYE BOLT FOR POLELINE HARDWARE

Yokelink Thimble eye bolts are Forged in two styles, straight and bent at a 45-degree angle. Used for attaching guys and deadends to poles and crossarms, furnished with one square nut, ends have cone points. Manufactured from ANSI / IEEE Std C135.80, Hot dip galvanized to meet ASTM A153, Class C specification.

Изтегли

Twist Lock Plunger Pin Catalogue or Specification

Yokelink Twist Lock Plunger Pin is spring-loaded and each pin includes a grease fitting and is zinc-plated for corrosion protection. Install by drilling a hole to accept plunger pin and weld the barrel into place. Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Locks securely with spring loaded pin and rotating handle. Each pin includes a grease fitting and is zinc-plated for corrosion protection. Pin is ideal for dump kits, farm equipment, wrecker attachments, stabilizer legs, wheel lift arms, and more.

Изтегли

Weld-on Hinges Catalogue or Specification

Yokelink Hinge is a mechanical device that creates a flexible connection between two parts. A hinge allows a component such as door, gate or lid, to rotate or pivot around a fixed point in order to open or close whilst maintaining stability and alignment. Yokelink Welding hinge to be welded on metal swinging doors. To be used in order to open very heavy metal gates, openings or door leaves. Our Bullet Hinges are made from special profile steel for weld-on applications. Esthetic half-round heads and 360°rotation of V-shaped fanges allow for ease of weld-on installation.Brass washer on each hinge permit smooth continuous operation.

Изтегли

Strut Channels Catalogue or Specification

Yokelink Strut channels are versatile and widely used components in Construction and industrial applications. They are metal channels that are used to support, Brace, and connect various components and structures. The channels are typically made of steel, aluminum, or Stainless Steel and come in different sizes and configurations. Strut channels can be used in a wide range of applications, including electrical, plumbing, HVAC, and structural support systems. They are commonly used to create framework or support structures for cable trays, pipes, conduit, and other equipment.

Изтегли

Strut General Fittings Catalogue or Specification

Yokelink External square plate Washers provide a base to lock down screwed rod with a nut and Washer. The flat brackets are used for joining two or three pieces of unistrut channel together forming angles in the same plane. Use to create right angles, tees and crosses. All are hot dipped galvanized. General fittings including Flat Plate Fittings,Angle fittings,Angular,"Z","U",Wing Shape fittings etc... Standard Finish: Zinc-Plated, Available for stainless steel and hot dip galvanized or power coating finish. We also offer Strut Channels, Channel nuts,Bracketry,Cantilever arms,Plain Channel Nut,Rod Hangers, Girder Clips & Cut Studs.

Изтегли

EN 14399 / DIN 6914 / ISO7412 BOLTS

EN 14399 / DIN 6914 / ISO7412 Hex bolts for high-strength structural bolting

Изтегли

ASTM F1554 Anchor Bolt & Anchor Rod

ASTM F1554 Standard Speciﬁcation for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Изтегли

ASTM A449 Bolts

ASTM A449- Standard Specification for Quenched and Temperature Steel Bolts and Studs

Изтегли

ASTM F3125/F3125M High Strength Structural Bolts and Assemblies

Standard Specification for High Strength Structural Bolts and Assemblies. This specification is a consolidation and replacement of four ASTM standards, including: A325, A490, F1852 and F2280

Изтегли